Root and install CWM on Samsung Galaxy Ace 3

The Galaxy Ace 3 arrives as Samsung's best entry into its popular and affordable Ace lineup, the galaxy ace line up is targeted at those who are cost conscious that is those those who don't really like spending much money on phones, The Ace 3 brings  a vanilla 3G version and either dual SIM support or LTE connectivity.
The Ace lineup was not just a mere mid-ranger, user have always enjoyed adequately-sized screens and powerful enough processors alongside timely software updates from Samsung to make it an excellent value offering long after the initial release.In the last post i showed you how to root the LG G2 today I am going to show you how to root and install CWM on the Samsung Galaxy Ace 3
 

NB :please keep in mind that rooting voids warranty,this means that you will not be able to claim warranty for a rooted device.

Tools Needed

• Samsung USB drivers.exe

• Odin_v3.07.zip

• Non-touch recovery.tar

• Touch recovery.tar

• Root.zip

Procedure(Installing CWM)

1. Install all the required Samsung USB Drivers(if you are having problem getting USB drivers installed download kies)
2. Extract Odin And Run"odin3_v3.07.exe" as Admin
3.  Select PDA Buttton
4.  Choose the TAR file of type of recovery you prefer (Touch or non touch)
5.  Active USB Dubugging , then power off the phone 
6.  Boot into download mode using the button combination"Home+ Volume DOWN + Power"
7.  Select Volume UP to continue(note that some mobile phones dont have middle buttons,so you will boot straight into download mode when without the need to use the volume up button to continue
8.  Press Start in Odin - The Phone will reboot now --you should have installed CWM
9.   Copy root.zip to your memory card / internal memory then turn off the phone
10.   Go to Clockwork Mod By using this button combination "Home + Volume UP + Power"
11.  Select Install zip from SD card , Select choose zip from SD card , select root.zip
     
12. Select reboot to system now

 
Procedure(Rooting)

1. Download the root tool,unfortunately it is in chinese
2. Turn on USB debugging 
3. connect your phone to your pc

NB: Your phone should be at least 70% charged.Be very cautions and follow the following steps because the app is in Chinese 

                       


                           

 

                           




                           

                       

 Now you have completed,Check if you have super user installed.You can replace the super user installed.