Pages

▼

25 December 2013

Unbrick a Hard Brick Phone without a usb jig

Unbrick a Hard  Brick Phone without a usb jig


Do you think that you have brick your phone? Your Phone Dead? You don't have JIG. Try steps below. It might fix your problem.

TO DO:
1. Battery out. 4secs or more. Battery in (Remove SIM card and SD Card to be saved)
2. Volume DOWN + Home + Power Button. Hold it EXACTLY 5 SECONDS!
(NOW YOU IN DOWNLOAD MOD)
3. You will see or hear nothing! but remember you are there!
4.Your screen will be black but remember you are in the screen seen below





Remember you are at this screen but you will see or hear nothing

4. After when you got in download mod if you remember you need to "Press Volume UP" to confirm it.  So press Volume UP and wait 2 seconds



After pressing the "volume up" you will be here but remember you will see nothing only the blank black screen.

5. Connect your mobile to the PC (Desktop ODIN Running). You will hear the sound. Which mean your phone connected.
6. Flash any stock firmware as you like....


Note: 
Remember everything working! You just don't see
Do it until it will work. 
Tested and Tried on Samsung Galaxy S2 and Samsung Galaxy S3 mini
at

6 comments:

  1. Anonymous4 May 2014 at 16:57

    I think your a bit confused this is for soft brick not hard brick, hard brick will require USB jig or JTAG

    ReplyDelete
  2. Unknown4 May 2014 at 17:10

    I know about the jtag but this can also work

    ReplyDelete
  3. Anonymous7 May 2014 at 18:26

    Jasonick ur completely wrong., Anonymous above is saying right-- its a soft brick only--> bcoz inn soft brick only u can go to DOWNLOAD MODE..

    i got hard brick few days before in my Galaxy Y, so i was unable to go to RECOVERY as well as DOWNLOAD MODE ( the mobile kept on bootloop-- restarting again & again so i failed to remain in download mode & recovery mode)

    I even tried, battery & everything else out, and after few hours, i inserted ONLY BATTERY but same restarting happened. As i dont have USB jig nor experience of using it & relying on its success, i finally gave up & sent mobile to service centre. TODAY i got a call that my mobile is ready, i will collect it tomorrow morning. I got to pay Rs.280 as it was software issue..

    ReplyDelete
  4. Anonymous7 December 2016 at 21:58

    Hard bricked with samsung galaxy s3 SCH-I535. classic. locked with ez-unlock.

    ReplyDelete
  5. Anonymous14 August 2017 at 04:50

    I don’t suppose many of websites give this kind of information.Phone parts

    ReplyDelete
  6. Unknown25 December 2017 at 05:43

    Tutorial Hard reset Acer E400 BeTouch

    ReplyDelete